Folia lib.

Ich habe bei Lidl ein “LED-Batterienachtlicht” gekauft für 4,99 Euro – einen ganz normalen Alltagsgegenstand. Zu meiner Überraschung war im Karton kein Tütchen mit Granulat gegen Feuchtigkeit, sondern nur schwer erkennbar war innen – auf einer der beiden Deckelflächen – ein ca 2×5 cm großer Aufkleber mit Buchstabensalat drauf: “anti-mold chip”. Die deutsche Beschriftung “Anti-Schimmel-Streifen” bringt bei Google keine sinnvollen Treffer. Der englische Begriff führt jedoch auf eine Web-Site eines Herstellers.

Zitat:

[*quote*]
——————————————————————
The ADKing Anti-Mold Chip is a biotech product containing anti-mold
agents which will inhibit or eradicate the growth of mold, bacteria
and certain other pests, by gradually releasing a gas which envelopes
the protected objects within their packaging environment.
——————————————————————
[*/quote*]

Wer sehr viele kleine Teile hat, konnte die bisher sorglos in den Verpackungen belassen. Aber dieser Gas-Krieg bedeutet, daß man Verpackungen wegwerfen MUSS, weil die sonst in die Wohnung ausgasen.

Das Mindeste, was man erwarten darf, ist, daß diese Streifen rückstandsfrei von den Kartons zu entfernen sind. Doch dem ist nicht so.

Höchste Zeit, Brüssel Feuer unter der Denkfläche zu machen.

FAQ auf der Web-Site des Herstellers:

http://www.anti-mold-chip.com/faq.html

[*/quote*]
——————————————————————
The ADKing Anti-Mold Chip is a biotech product containing anti-mold
agents which will inhibit or eradicate the growth of mold, bacteria
and certain other pests, by gradually releasing a gas which envelopes
the protected objects within their packaging environment.

Q1. What are ADKING Anti-Mold Chips?
A: The ADKING Anti-Mold Chip is a biotech product containing anti-mold agents which will inhibit or eradicate the growth of mold, bacteria and certain other pests, by gradually releasing a gas which envelopes the protected objects within their packaging environment.

Q2. How is the ADKING Anti-Mold Chip different from similar products currently available on the market? Is it safe?
A: The anti-mold preparation of the ADKING Anti-Mold Chip is made from numerous natural plant extracts combined with various special herbal essences; they are extracted and fermented using a unique biotechnical method. They are natural, non-toxic and environmentally friendly, and superior to other conventional chemically refined compounds.
Certifications and reports are available, please contact us for details.
Lab experiments have shown that ADKING Anti-Mold Chip can eradicate the following more active and familiar mildew types: Aspergillus niger, Penicillium pinophilum, Trichophyton mentagrophytes, Aureobasidium pullulans, Gliocladium virens and Chaetomium globosum; as well as the following bacteria: Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli.

Q3. How do I use ADKING Anti-Mold Chips?
A: 1. Open the foil package and remove the ADKING Anti-Mold Chips. 2. At time of final packing place one or more pieces of ADKING Anti-Mold Chips in packaging.
3. The packaging should be closed immediately after placing the chip(s) in the packaging and not reopened prior to shipment.
4. Any unusedADKING Anti-Mold Chips should be stored in the original foil bag, closed airtight, and used as soon as possible.

Q4. We currently use another type of anti-mold stickers; frequently we cannot use up a whole pack at a time. Stickers which have been exposed to the air for a long time lose their effectiveness, and we have no choice but to throw them away, resulting in cost and wastage; do ADKING Anti-Mold Chips have these drawbacks as well?

A:
Our anti-mold chips are packed in an easy-to-count strips, making
dispatching them to production lines very simple and convenient; you can dispatch the exact quantity needed by the workers, and keep the remaining anti-mold chips in the foil bag. This bag can be sealed and stored without affecting the chips, preventing wastage and financial loss.
Remaining anti-mold chips can be sealed and stored, preventing loss of
effectiveness due to long exposure to the air (feel free to contact us for more details).

Q5. How many ADKING Anti-Mold Chips should I use?
A:
The number ofADKING Anti-Mold Chips to be used depends on the size of the packaging. In most cases 1 or 2 ADKING Anti-Mold Chip will be sufficient (for 33x22x12,cm or so), for boots 3-4 pieces are suggested. We recommend testing under controlled conditions, which differ from customer to customer, so that the best mold prevention effectiveness can be achieved.

Q6. How long can I store ADKING Anti-Mold Chips?
A: Unopened foil bags of ADKING Anti-Mold Chips can be stored for up to one and half years. Once the bag is opened the Anti-Mold Chips should be used as quickly as possible. Any unused Anti-Mold Chips should be placed back in the original foil bag, sealed airtightly, and used as soon as possible.

Q7. How should ADKING Anti-Mold Chips be stored?
A: ADKING Anti-Mold Chips should be stored in a cool, dry place, away from direct sunlight.

Q8. If we have to reopen the packaging for any reason, do we need to change the ADKING Anti-Mold Chips?

A: When you reopen the packaging, new sources of mildew present in the surrounding environment can enter the packaging. We suggest replacing the Anti-Mold Chips to guarantee continuous anti-mold prevention.

Q9. If we find mold on the shoes, and then use ADKING Anti-Mold Chips, will the mold disappear?

A: ADKING Anti-Mold Chips can only suppress the growth of mold. The Anti-Mold Chip will not make existing mold disappear.

Q10. If I use ADKING Anti-Mold Chips do you guarantee that I will not have a claim?

A: As the final use of the ADKING Anti-Mold Chips is in the hands of the factory and we cannot control how they are used or the condition of the shoes when packed, unfortunately we cannot guarantee you will not have any claim. However, we can assure ADKING Anti-Mold Chips offer the most effective and safe protection against mold available today.12

All Rights Reserved © 2009 ADKING Anti-Mold Chip – E-mail:
——————————————————————
[*/quote*]